Samsung AM KNTD Series Installation Manual page 30

Step 14 Performing the final check
To complete the installation, perform the following checks
and tests to ensure that the air conditioner operates
correctly.
1 Check the following:
• Strength of the installation site
• Tightness of pipe connection to detect gas leak
• Electric wiring connection
• Heat-resistant insulation of the pipe
• Drainage
• Grounding conductor connection
• Correct operation (follow the steps below)
2 Press the button and check the following:
• The indicator on the indoor unit lights up.
• The airflow blade opens and the fan gears up for
operation.
Press any button and check the following:
3
• The appropriate indicator lights up and the air
conditioner operates according to the selected
mode or function.
4 Press the button and check the following:
• The airflow blades work properly.
DVM Boracay_IM_EN_DB68-06417A-00_16.09.22.indd 29
Step 15 Providing information for
user
After finishing the installation of the air conditioner,
you should explain the following to the user. Refer to
appropriate pages in the user & installation manual.
1 How to start and stop the air conditioner
2 How to select the modes and functions
3 How to adjust the temperature and fan speed
4 How to adjust the airflow direction
5 How to set the timers
6 How to clean and replace the filters
NOTE
• When you complete the installation successfully, hand
over the user & installation manual to the user for
storage in a handy and safe place.
English 29
2016/9/22 11:29:22