Table of Contents
Advertisement
Option
SEG19
Individual control of a
Explanation
PAGE
remote control
Indication Details Indication
0 or 1
2
Indication
3
and Details
3
4
(*) Advanced function: Controlling cooling/heating current or power saving with motion detect.
(*1) Minimizing fan operation when thermostat is off
– Fan operates for 20 seconds at an interval of 5 minutes in Heat mode.
(*2) 1: Fan is turned on continually when the hot water heater is turned on, 3: Fan is turned off when the hot water heater
is turned on with cooling only indoor unit
Cooling only indoor unit: To use this option,install the Mode Select switch(MCM-C200) on the outdoor unit and fix it as
Cool mode.
(*3) It is only for wall-mounted indoor unit with EEV Integrated. If any design condition meets either of the following
below, please set SEG11 to "7".
a
The total number of wall-mounted indoor units with EEV Integrated in one (modular) system is more than 20.
b
The total number of wall-mounted indoor units with EEV Integrated in one (modular) system is more than "the
total of one(modular) system's capacity(kW) / 2" ("the total of one(modular) system's capacity(BTU/h) / 6800").
ex) Outdoor capacity 28kW → 28 /2 = 14. The total number of wall-mounted indoor units with EEV Integrated in
one (modular) system is more than 14.
DVM Boracay_IM_EN_DB68-06417A-00_16.09.22.indd 23
SEG20
SEG21
Heating setting compensation / Removing
condensated water in heating mode
Details
Removing
Heating
Details
Indication
Condensated
Setting
Water in
Compensation
Heating Mode
channel 1
0
Default (*5)
Disuse
channel 2
1
2 °C
Disuse
channel 3
2
5 °C
Disuse
3
Default (*5) Use (*6)
4
2 °C
Use (*6)
channel 4
5
5 °C
Use (*6)
SEG22
EEV Step of stopped unit during oil
return/defrost mode
Indication
Details
0
Default value
Oil return or Noise
1
decreasing in defrost mode
SEG23
SEG24
-
English
23
2016/9/22 11:29:20
Advertisement
Table of Contents
