Table of Contents
Advertisement
Insert both sides of core wire of the power cable into
3
the connection sleeve.
• Method 1: Push the core wire into the sleeve from
both sides.
• Method 2: Twist the wire cores together and push
it into the sleeve.
Method 1
Connection sleeve
4
Using a crimping tool, compress the two points and
flip it over and compress another two points in the
same location.
• The compression dimension should be 8.0.
• After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
Method 1
Compress it 4 times
5 mm
5
Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
Three or more layers of insulation are required.
Method 1
Insulation tape
40 mm
DVM Boracay_IM_EN_DB68-06417A-00_16.09.22.indd 15
6
7
Method 2
Connection sleeve
Compression
dimension
• In case of extending the electric wire, please DO NOT
Method 2
Compress it 4 times
5 mm
Method 2
Insulation tape
35 mm
Apply heat to the contraction tube to contract it.
Contraction tube
After tube contraction work is completed, wrap it with
the insulation tape to finish.
Insulation tape
CAUTION
• Make sure that the connection parts are not
exposed to outside.
• Be sure to use insulation tape and a contraction
tube made of approved reinforced insulating
materials that have the same level of withstand
voltage with the power cable. (Comply with the
local regulations on extensions.)
WARNING
use a round-shaped pressing socket.
– Incomplete wire connections can cause electric
shock or a fire.
English
15
2016/9/22 11:29:15
Advertisement
Table of Contents
