Samsung AM KNTD Series Installation Manual page 21

Installation Procedure
Setting an indoor unit address (MAIN/RMC)
1 Check whether power is supplied or not.
– When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
2
3 Assign an indoor unit address by wireless remote control.
The initial setting status of indoor unit ADDRESS(MAIN/RMC) is "0A0000-100000-200000-300000".
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Explanation PAGE
Indication DetailsI Indication Details
Indication
and Details
0
Option SEG7
Explanation PAGE
Indication
Indication
and Details
1
CAUTION
• When A~F is entered to SEG5~6, the indoor unit MAIN ADDRESS is not changed.
• If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you input the option
value of SEG5~6.
• If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input the option value of
SEG11~12.
• You cannot set SEG11 and SEG12 as F value at the same time.
20 English
DVM Boracay_IM_EN_DB68-06417A-00_16.09.22.indd 20
SEG2 SEG3
Mode Setting Main address
Indication
0
A
1
SEG8 SEG9
Setting RMC address
Details Indication
0
-
1
SEG4
100-digit of indoor 10-digit of indoor
unit address
Details Indication Details Indication
No
Main
address
0~9 100-digit 0~9
Main
address
setting
mode
SEG10
Group channel(*16)
Details Indication
No RMC
address
-
RMC
RMC1
address
setting
mode
SEG5 SEG6
The unit digit of an
unit indoor unit
Details Indication Details
A unit
10-digit 0~9
digit
SEG11 SEG12
Group address
Details Indication Details
0~F RMC2 0~F
2016/9/22 11:29:19