Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for netvox R311G
Summary of Contents for netvox R311G
-
Page 1: User Manual
R311G Model： Wireless Light Sensor Light Sensor User Manual... -
Page 2: Table Of Contents
Table of Content 1. Introduction................................2 2. Appearance................................. 3 3. Main Features................................3 4.Set up Instruction.................................4 4.1 Power on and Turn on / off..........................4 4.2 Join Into Lora Network............................ 4 4.3 Function Key..............................4 4.4 Data Report...............................4 5. Restore to Factory Setting............................5 6. -
Page 3: Introduction
1. Introduction R311G is a long-distance light sensor based on the LoRaWAN open protocol (Class A). LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance. -
Page 4: Appearance
2. Appearance Indicator Light sensor Base Function Key Function Key 3. Main Features Compatible with LoRaWAN 2 section 3V CR2450 button battery powered Report current surrounding illuminance Easy set up and installation... -
Page 5: Set Up Instruction
To join R311G into LoRa network to communicate with LoRa gateway. The network operation is as following: (1) If R311G had never joined any network or at factory setting mode, turn on the device; it will search an available LoRa network to join. The green indicator will stay on for 5 seconds to show it joins into the network, otherwise, the green indicator will be off. -
Page 6: Restore To Factory Setting
1. Press and hold both function keys for 5 seconds till the green indicator flashes and then release; LED flashes quickly 20 times. 2. R311G will stay off after restoring to factory setting. Press function key to turn on R311G and to join a new LoRa network. -
Page 7: Low Voltage Alarming
7. Low Voltage Alarming The operating voltage threshold is 2.4V. If the voltage is lower than 2.4V, R311G will send a low-power report to the Lora network. 8. MyDevice Monitoring Interface Demonstration 9. Important Maintenance Instruction This device is NOT truly waterproof/ resistant and is for indoor use.
Need help?
Do you have a question about the R311G and is the answer not in the manual?
Questions and answers