Digital Watchdog Star-Light Plus DWC-V7553W User Manual page 14

Installation - Instructions
Using the mounting template or your camera,
1
mark and drill the necessary holes to mount the
bracket to a wall or ceiling.
Pull a necessary wires through and make the
2
proper connections. See pages 14-15.
Use the three mounting screws to install the
3
camera on the wall or ceiling. See page 16 for
tilting and pan adjustment options.
Adjust the camera's tilt and rotation as needed.
4
See page 16 for more information.
DWC-V7553WTIR models: the camera has a
5
manual IR switch, located under the camera's
lens. You can use this switch to manually turn
the IR LED board on or off according to the
installation needs.
When the installation is completed, place the
6
camera's dome over the camera's body by
clicking the dome into place.
Detach the protection film from the dome to
7
complete the installation.
IR switch
ON/OFF
14
Template sheet
DWC-V7553WTIR
models