Dtpl Print Commands; Introduction - Datamax ST-3210 Programmer's Manual

DTPL Print Commands

5.0

Introduction

The following table lists the printer's various print commands.
Command
Print / Cut Ticket
Print / No Cut Ticket
Print Ticket And Eject
Print / Cut (Hold Ticket
Image)
Print / No Cut (Hold
Ticket Image)
DTPL Programmer's Manual
Format
<p> The printer will cut the ticket after printing if it has a cutter.
<q> The printer will not cut the ticket after printing even if it has a cutter.
<z> The printer will eject the ticket after the ticket is cut.
<h> Allows the user to update a number of fields on the ticket without re-transmitting all of
the data. When this command is used, the printer will hold the print image in memory.
Only text and bar codes can be updated on a 'held' ticket.
<r> The ticket is not cut until a normal print command (<p> or FF) is sent.
Description
9