Datamax Mark II M-4206 Operation Instructions Manual page 18

8. The IP Address assigned to the printer can be viewed on
the Wireless Report.
To print the 'Wireless Report':
a. Press the PAUSE, FEED, CANCEL buttons at the
same time.
Once the previous steps have been successfully completed you may now use the IP Address to:
> Install a printer driver, and start printing from your Windows ® applications. See section, Installing the Printer Driver.
-or-
> Browse to the printer's internal web pages to print test labels or configure network settings such as assigning a new IP
address or SSID to the printer and enabling/configuring wireless security protocols. See section, Browsing to the
Printer's Internal Web Pages.
A d d i t i o n a l I n f o r m a t i o n
The information on this label will vary depending on your
configuration and firmware version.
16