Wiring Diagrams - Envirovent CYCLONE 7 230V Series Installation Manual For Engineer / Installer

Wiring Diagrams

230V
220V - 240V
50/60Hz
Mains Supply
Connect the local isolator to the Mains as part of the fixed wiring.
Connect the N and L connectors of the fan power cable to the
local isolator.
SELV
220V - 240V
50/60Hz
Mains Supply
The red 12V cable from the unit must be connected to the red cable
on the SELV power supply using the supplied terminal block. The
black 12V cable from the unit must be connected to the black cable
on the SELV power supply using the supplied terminal block.
AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE
Local
Isolator
Local SELV Power
Isolator Supply
DO NOT
THROW AWAY
Connector
Block
+12V DC (Red)
0V DC (Black)
5