DataCard SP75 Plus Quick Install Manual page 7

Connect a wireless adapter to a computer and set the adapter to the values for the wireless
print server. See the print server documentation for the values to use. Continue when the print
Use HP Web Jetadmin to set up and configure the print server for your network.
Obtain the settings, including the print server IP address or network name, from your
Congratulations,
you have installed the
printer! Complete the
installation report
and install your ID
software now.
server is identified to the network (can take up to 20 minutes).
Set the print server IP address or network name in the driver's Properties\
Ports\Configure or Properties\Details\Port Settings dialog box.
Open the Printing Preferences (Windows 2000 and XP), Properties (Windows 98
and Me), or Default Document Properties (Windows NT) dialog box and change
the laminator "Apply Material" settings to match the supplies loaded in the
Connect the printer and wireless
See your organization's wireless
security policy when setting up a
network personnel.
IP Address:
a Insert the Smart Driver CD-ROM.
b Click "Install the Printer" after the
window opens. Choose "DIrect
Network" during installation.
printer. Change other settings if needed.
Open the Printer Toolbox when
Printing Preferences, Properties,
or Document Default Properties
opens. Click "Print Sample Card"
Compare your card with the
print server using a USB cable.
wireless connection.
on the Printer Toolbox.
factory card.
Page 7