502: The Card Data Is Missing Or Is Not Usable. The Card Cannot Print; 503: The Magnetic Stripe Data Is Missing. The Card Cannot Print; 505: Bonjour Is Not Installed. Cannot Connect To The Printer - DataCard SD260 Installation And User Manual

502: The card data is missing or is not usable. The card cannot print.

The driver could not use the prepared data.
The PC did not process the data successfully.
Make sure the data is present. Send the card to print
again.
If the card does not print the second time, troubleshoot
the problem.
A mistake in using magnetic stripe escapes or blocking
escapes can cause this message.

503: The magnetic stripe data is missing. The card cannot print.

The driver is set to encode magnetic stripe data only.
• The card did not contain any magnetic stripe data.
• Make sure the magnetic stripe data is present.
• Identify the magnetic stripe data using escapes or fonts.
See
Stripe
• To print on the card, change the setting in Printing Preferences to disable
Encode Only. See

505: Bonjour is not installed. Cannot connect to the printer.

• The driver uses Bonjour for Windows to
connect to a printer using a USB cable.
• If you previously installed a network-
connected printer and then installed a USB-
connected printer, Bonjour might not be
installed.
• Bonjour might have been removed from the
PC by another program or by a user.
To solve the problem:
• Remove the driver, using the Remove icon on the driver CD
• Find a Bonjour for Windows download and install it.
86
"Use Magnetic Stripe Escapes"
Fonts".
"Encode Magnetic Stripe without
installer. Install the USB printer following the steps in the Quick
Install Guide.
or "Use Magnetic
Printing".
Using the Printer