Subscribe to Our Youtube Channel
Related Manuals for BodyCraft SW-HFT
Summary of Contents for BodyCraft SW-HFT
- Page 1 Assembly Instructions ~ 240 Min. L 102 | W 142 | H 208 SWHFT.01.02 Art. No. SW-HFT Cable Pull Module HFT...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly STORAGE AND TRANSPORT General Instructions TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Maintenance and Inspection Calendar DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing... - Page 4 With BodyCraft® fitness equipment, the focus is on what sport is all about: maximum performance! Therefore, the equipment is developed in close consultation with athletes and sports scientists.
- Page 5 ABOUT THIS MANUAL Please carefully read the entire manual before installation and first use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance.
-
Page 6: General Information
GENERAL INFORMATION Technical Data Weight and Dimensions Article weight (gross, incl. packaging): 168.8kg Package dimensions (L x W x H) approx.: Box 1: 205cm x 38cm x 16cm Box 2: 124cm x 60cm x 21cm Box 3: 27cm x 14 cm x 13cm Box 4: 28cm x 19cm x 15cm Set-up dimensions (L x W x H) approx.: 102cm x 142cm x 208cm... -
Page 7: Personal Safety
Personal Safety ⚠ DANGER Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly affected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. -
Page 8: Set-Up Place
Set-Up Place ⚠ WARNING Do not place the equipment in main corridors or escape routes. CAUTION ⚠ Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. The training room should be well ventilated during training and not be exposed to any draughts. -
Page 9: Assembly
ASSEMBLY General Instructions DANGER ⚠ Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries. -
Page 10: Scope Of Delivery
Scope of Delivery The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly. CAUTION ⚠... - Page 11 (27) Kabel 2x...
-
Page 12: Assembly
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fit properly. Tighten the screws using the tool only when you are instructed to do so. Step 1: Assemble upright frame Carefully install two End Caps (38) onto each of the Base Frame Legs (1R &... - Page 14 Step 2: Assemble top frame Slide Pulley Height Adjusters (15R & 16L) onto the Upright Frames (2R & 3L) Attach Upright Frames (2R & 3L) to the Base Frame Legs (1R & 1L) using four pre-installed 3/8” Chromed Washers (62), and 3/8” Chromed Nylon Nuts (68). Attach two Rotating Pulley Holders (17) to the Right &...
- Page 16 Step 3: Assemble guide rods Insert two Plastic Guide Rod Holders (24) into the outer holes of each of the Base Frame Legs (1L & 2R). Install two Rubber Donuts (22) on the Guide Rods (5) and insert the two Guide Rods (5) together with the Stack Spacers (23) into the Plastic Guide Rod Holders (24).
- Page 18 Step 4: Assemble cable and pulleys Fasten the Ball End of Cable (27) to the Pulley Holder (17) with two Pulleys P1 and P2 (36) using a total of two 3/8” X 1-3/4” Hex Bolts (53) and two 3/8” Black Nylon Nuts (69), Fig A. Route the Cable (27) over the two Pulleys P3 and P4 and mount Pulley P4 to the Right Top Frame (6R) using one 3/8”...
- Page 20 Step 5: Assemble right and left panel Loosely attach Weight Panels (10R & 11L) to the Reae Upright Frames (4) using eight Plastic Studs (43), four 1/4” X 6” Hex Bolts (54), eight 1/4” Washers (66), and four 1/4” Nylon Nuts (70). Loosely attach Weight Panels (10R &...
- Page 21 Step 6: Accessories and Exercise Guide Placement Mount the Top Cross Support (8) to both sides of the Upright Frame (2R & 2L) with a total of four 3/8” Chromed Washers and four 3/8” Chromed Nylon Nuts (68). Attach the Single Handles (32), Chin Assist Strap (30), Tricep Rope (31), Sport Bar (12), two Chains (33), Ankle Strap (29) and the Long Bar (13) to the Top Cross Support (8).
-
Page 22: Storage And Transport
STORAGE AND TRANSPORT General Instructions WARNING ⚠ The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ࣑... -
Page 23: Troubleshooting, Care And Maintenance
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions WARNING ⚠ Do not make any improper changes to the equipment. CAUTION ⚠ Damaged or worn components may affect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. -
Page 24: Maintenance And Inspection Calendar
Maintenance and Inspection Calendar To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specified intervals: Part Weekly Monthly Quarterly Cables Screw connections Pulleys and cable routing... -
Page 25: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. This could be a floor mat, for example, which makes your fitness equipment stand more securely and also protects the floor from falling sweat, but it could also be additional handrails on some treadmills or silicone spray to keep moving parts in good shape. -
Page 26: Ordering Spare Parts
The serial number of your equipment is unique. It's located on a white sticker. The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate field. Serial number: Brand / Category: BodyCraft / Cable Pull Model Name: Article Number: SW-HFT... -
Page 27: Parts List
Parts List Name Supplier Parts No. Specification Qty. BASE FRAME LEG - RIGHT TRICEP ROPE BASE FRAME LEG - LEFT SINGLE HANDLE UPRIGHT FRAME - RIGHT CHAIN UPRIGHT FRAME - LEFT SNAP HOOK REAR UPRIGHT FRAME POP - PIN GUIDE ROD PULLEY TOP FRAME - RIGHT PLASTIC BUSHING... - Page 28 3/8" BLACK WASHER 5/16" CHROMED WASHER 5/16" BLACK WASHER 1/4" WASHER 1/2" NYLON NUT 3/8" CHROMED NYLON NUT 3/8" BLACK NYLON NUT 1/4" NYLON NUT 1/2" NUT M4 NYLON NUT 1" NUT...
-
Page 29: Exploded Drawing
Exploded Drawing... -
Page 30: Warranty
WARRANTY Training equipment from Taurus® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. Error Descriptions Your fitness equipment is developed for long-term, high-quality training. - Page 31 Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.
-
Page 32: Contact
CONTACT TECHNICAL SUPPORT TECHNICAL SUPPORT & SERVICE TECHNICAL SUPPORT & SERVICE �� �� �� +49 4621 4210-900 80 90 16 50 +33 (0) 172 770033 +49 4621 4210-945 +49 4621 4210-933 �� +49 4621 4210-698 �� �� info@fitshop.dk service-france@fitshop.fr �� technik@sport-tiedje.de ��... - Page 33 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA Sport-Tiedje is Europe’s largest specialist store www.sport-tiedje.co.uk for home fitness equipment with currently www.sport-tiedje.de/blog more than 70 stores and one of the world’s most renowned online mail order companies for fitness equipment. Private customers order via the 25 www.facebook.com/SportTiedje web shops in the respective national language or have their desired equpiment assembled on...
- Page 34 Notes...
- Page 36 Cable Pull Module HFT...
Need help?
Do you have a question about the SW-HFT and is the answer not in the manual?
Questions and answers