Pc Get-Function Command To Lcd Monitor - BenQ BH2801 Installation Manual

Network
14
Setting
(5) Byte5: The Hour of the Off
Timer. Byte5=0x00~0x17.
(6) Byte6: The Minute of the
Off Timer. Byte6=0x00~0x3B.
(7) Byte7: Select the Video
Source.
0x00=VGA, 0x01=HDMI1,
0x02=HDMI2, 0x03=AV,
0x04=YPbPr,
0x05=S-Video, 0x06=DVI,
0x07=DisplayPort, 0x08=SDI,
0x09=Multi-Media.
0x0A=Network, 0x0B=USB
Display
0xFF=Default. Other values
are reserved.
(8) Byte8~9 are reserved, and
should be 0x00.
Input Value: Byte1 - Byte2 -
Byte3...Byte9
(1) Byte1=0x00: IP Setup
Mode
Byte1=0x01: IP
Address
Byte1=0x02: Get
Subnet Mask
g E1
Byte1=0x03: Default
Gateway
Byte1=0x04: Primary
DNS
Byte1=0x05:
Secondary DNS
Byte1=0x06: MAC
0x04=YPbPr,
0x05=S-Video, 0x06=DVI,
0x07=DisplayPort, 0x08=SDI,
0x09=Multi-Media.
0x0A=Network, 0x0B=USB Display
0xFF=Default. Other values are
reserved.
(8) Byte8~9 are reserved, and
should be 0x00.
Input Value: Byte1 - Byte2 -
Byte3...Byte9
(1) Byte1=0x00: IP Setup Mode
Mask
connecting NIC MAC Address
MAC Addess
(2) Byte2~9 are reserved, should be
0x00.
21
Byte1=0x01: IP Address
Byte1=0x02: Get Subnet
Byte1=0x03: Default Gateway
Byte1=0x04: Primary DNS
Byte1=0x05: Secondary DNS
Byte1=0x06: Current
Byte1=0x07: Ethernet (RJ45)