Team Corally Kronos C-00170 Quick Start User Manual page 9

1/8th scale 4wd electric ready to run
Table of Contents

Advertisement

MAINTENANCE
SHOCK ABSORBER MAINTENANCE
It may be necessary to replace the silicone oil in the shock absorbers every 40 runs.
It depends on how you drive and the type of terrain you drive on.
Remove the shock absorbers from the vehicle. (4x)
Fill the shock absorbers with new silicone oil. Never use any other type of oil.
Use 450cps silicone oil for FRONT
Use 400cps silicone oil for REAR
.www. corally.com/Chemicals/Silicone-Oils/
FILL
• Pull the Shock shaft
• Move the piston up&down
down.
(3-4x) to release the air
bubbles in the silicone
• Fill the shock body with
oil.
silicone oil.
• Front : 450cps
Rear : 400cps
Remove the shock cap.
MOVE
WAIT
UP
5min
• Pull the Shock shaft
down.
• Install the shock absorb-
er vertically and let it sit
for a few minutes until
the bubbles rise to the
surface.
Drain the oil from the shock absorber.
TIGHTEN
MOVE
50%
• Install the silicone mem-
• Gently move the piston
brane in the shock cap.
in upper position.
• Tighten slightly the
• The excess will flow out
shock cap on the shock
of the shock absorber.
body.
• A little oil will flow out of
the shock absorber.
TIGHTEN
UP
FULLY
• Allow the piston in the
upper position.
• Tighten the cap fully but
not too much otherwise
the membrane will be
deformed.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents