Installing the power-button board
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of power-button board and provides a visual representation of the installation procedure.
Steps
1
Align the screw hole on the power-button board with the screw hole on the palm-rest and keyboard assembly.
2
Replace the screw (M1.6x2) that secures the power-button board to the palm-rest and keyboard assembly.
3
Align the screw hole on the power-button bracket with the screw hole on the palm-rest and keyboard assembly.
4
Replace the screw (M1.6x2) that secures the power-button bracket to the palm-rest and keyboard assembly.
Next step
1
Install the
I/O
board.
2
Install the fan.
3
Install the
WLAN
card.
4
Install the battery.
5
Install the
base
cover.
6
Follow the procedure in
Power button with fingerprint reader
After working inside your
computer.
Removing and installing components
43