Download Print this page

Joovv Elite Quick Start Manual

Mobile stand

Hide thumbs Also See for Elite:

Download this manual

STEP 1

Lay out all 6 Joovv devices on a scratch-free surface.

STEP 2

Set the Elite bracket and connection bars on the Joovv Elite

system, making sure to line up all screw locations, as shown

in Figure A.

STEP 3

Hand-tighten the screws with the included Allen wrench.

STEP 4

After setting up the mobile stand using separate instructions,

hang your Joovv Elite and proceed to the next step.

STEP 5

Connect the power and patch cords, as shown in Figure A.

STEP 6

Set the pairing switches to the appropriate lead and follow

modes, as shown in Figure A.

STEP 7

Plug in the power cords to a wall outlet and you're ready to

start Joovvin'!

If you'd prefer instructional setup videos,

please visit:

www.joovv.com/setup

Quickstart Guide — Mobile Stand

#1 Lead Mode

#4 Follow Mode

For comprehensive instructions, please review the product

manual that was included with your Joovv devices.

Joovv Elite

#2 Follow Mode

#3 Follow Mode

#5 Follow Mode

#6 Follow Mode

FIG. A

Page 1 STEP 1 Lay out all 6 Joovv devices on a scratch-free surface. STEP 2 Set the Elite bracket and connection bars on the Joovv Elite system, making sure to line up all screw locations, as shown #1 Lead Mode #2 Follow Mode #3 Follow Mode in Figure A.
Page 2 Figure C. STEP 4 Place your Elite back into position and plug back in the power cords and turn back on each device. Then, screw the braided cables to the threaded posts securing your Elite and you’re ready to start Joovvin’!