Alfa Romeo STELVIO Owner's Handbook Manual page 77

The two white notches which are shown
at the third segment blink to indicate the
need to shift gear.
100
Trip A and B
For all driving modes ("Dynamic",
"Normal" and "Advanced Efficiency"),
with the ignition device ON, the "Trip
computer" can be used to display the
values related to the car's operating
state.
This function is characterised by two
separate records, called "Trip A" and
"Trip B" (the latter can be deactivated
by Connect system), where the car's
"complete missions" (journeys) are
recorded in a reciprocally independent
manner.
"Trip A" and "Trip B" are used to display
the values relating to fig. 101:
Distance travelled
Average fuel consumption
Average speed
Active trip
Fuel level gauge
05036S0177EM
101
To reset the values, press and hold down
the button on the right stalk fig. 102.
102
Performance
The displayed parameters vary
depending on the active mode. The
modes can be selected through the "Alfa
DNA™" system and are as follows:
Normal
103
The screen graphically reproduces
05036S0122EM
some parameters closely linked to the
efficiency of the driving style, with a view
to limiting consumption.
05036V0002EM
05036S0168EM
75