Cleaning And Maintenance; Technical Information - ECG FS 40 Instruction Manual

Hide thumbs Also See for FS 40:

Table of Contents

Available languages

CLEANING AND MAINTENANCE

Unplug the cord from the outlet prior to cleaning the fan!

2. Use a soft dry towel to clean. Do not use solvents or other chemical agents.

Refer to the fan assembly scheme for dismantling the appliance.

4. Make sure no liquid can enter the motor.

We recommend keeping the package for transporting the fan or storage.

Diameter 40 cm

Nominal voltage: 230 V~ 50 Hz

Nominal input power: 50 W

Noise level: 67 dB

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into

plastic recycling containers.

DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European

countries with an implemented recycling system)

The represented symbol on the product or package means the product shall not be treated as domestic waste.

Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent

negative impacts on human health and the environment by properly recycling your product.

Recycling contributes to preserving natural resources. For more information on the recycling of this product,

refer to your local authority, domestic waste processing organization or store, where you purchased the

product.

This product complies with EU directive requirements on electromagnetic compatibility and

electrical safety.

The instruction manual is available at website www.ecg-electro.eu.

Changes in text and technical parameters reserved.

DECORATIVE COVER ASSEMBLY

ON THE BACK SIDE OF THE COVER, YOU WILL FIND 3 SCREWS,

6 WASHERS AND 3 HOLES TO ATTACH.

PLACE THE COVER INTO THE MIDDLE OF THE SCREEN.

USE A PHILLIPS SCREWDRIVER AND TIGHTEN THE SCREWS.

08/05

Table of Contents