Battery Removal/Installation; Charging - Hitachi DH 14DSL Handling Instructions Manual

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latches
(2 pcs.) to remove the battery (See Figs. 2 and 3).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 3).

CHARGING

Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to a receptacle.
When the power cord is connected, the charger's
pilot lamp will blink in red. (At 1-second intervals)
2. Insert the battery into the charger
Firmly insert the battery into the charger until the line
is visible, as shown in Fig. 4, 5.
Latch
Rechargeable battery
Pull out
Pilot
lamp
<BSL1430> <BSL1830>
31
English
Ventilation holes
Terminals
Battery cover
Fig. 2
Handle
Insert
Rechargeable
battery
Push
Latch
Fig. 3
Rechargeable
battery
Charger
Fig. 4
Line
Line
Fig. 5