Battery Removal/Installation; Charging - Hitachi DH 14DL Handling Instructions Manual

English

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery
latches (2 pcs.) to remove the battery (see Figs. 1
and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities.
(See Fig. 2)

CHARGING

Before using the power tool, charge the battery as
follows.
1. Connect the charger's power cord to a
receptacle.
When the power cord is connected, the
charger's pilot lamp will blink in red. (At
1-second intervals).
2. Insert the battery into the charger.
Insert the battery fi rmly, until it contacts the
bottom of the charger compartment.
CAUTION
If the battery is inserted in the reverse direction, not only recharging will become
impossible, but it may also cause problems in the charger such as deformed
recharging terminal.
Rechargeable
battery
Rechargeable
battery
Pilot lamp
38
Latch
Rechargeable
battery
Fig. 1
Handle
Push
Latch
Fig. 2
Insert
Hole for
connecting the
rechargeable
battery
Fig. 3
Insert
Pull out