Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Connect the display cable to the camera module.
2. Using the alignment posts, place the camera module on the display panel and snap it into place.
Post-requisites
1. Follow the procedure from step 5 to step 6 in
2. Replace the
display
assembly.
3. Replace the battery.
4. Replace the
base
cover.
Replacing the camera
computer. After working inside your computer, follow the instructions in
"Replacing the display
panel".
46
After
Replacing the camera
71
Advertisement
Table of Contents
