Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
3. Remove the
display
assembly.
Procedure
1. Remove the display cable from inside the hinge covers.
2. Using a plastic scribe, pry up the display-panel assembly to release the tabs that secure display-panel assembly to the display back-
cover and antenna assembly.
Figure 35. Removing the display back cover and antenna assembly
1. display-panel assembly
3. hinge covers (2)
5. display back-cover and antenna assembly
3. Remove the camera.
4. Remove the
sensor
board.
5. Remove the
display
cable.
Removing the display panel
computer. After working inside your computer, follow the instructions in
2. plastic scribe
4. display cable
Removing the display panel
39
After
61
Advertisement
Table of Contents
