Removing The Display Cable; Prerequisites; Procedure - Dell Inspiron 15-5568 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1. Remove the base cover.
2. Remove the battery.
3. Remove the display assembly.
4. Follow the procedure from step 1 to step 2 in
5. Remove the camera.

Procedure

1. Peel off the tape on the sensor-board connector.
2. Open the latch and disconnect the sensor-board cable from the sensor board.
Figure 37. Removing the sensor-board cable
1. display panel
3. latch
3. Peel off the tape on the display-cable connector.
4. Open the latch and disconnect the display cable from the display panel.
5. Note the display cable routing and remove the display cable from the routing guides on the display-panel assembly.
6. Peel off the tape that secures the display cable from the display-panel assembly.
7. Lift the display cable off the display-panel assembly.
64

Removing the display cable

Removing the display cable
computer. After working inside your computer, follow the instructions in
"Removing the display panel".
2. tape
4. sensor-board cable
41
After