Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 15-5568 Service Manual

2-in-1

Hide thumbs

Table Of Contents

Table of Contents

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your

working inside your

computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Prerequisites

1. Remove the

base

cover.

2. Remove the battery.

3. Remove the

wireless

card.

4. Remove the

memory

modules.

5. Remove the

heat

sink.

6. Remove the

system

board.

Procedure

1. Turn the computer over and open the display to 180-degree angle.

CAUTION:

Place the computer on a soft and clean surface to avoid scratching the display.

Figure 32. Removing the display assembly

a. palm rest and keyboard assembly

b. display assembly

2. Place the computer on a flat surface with the display facing down.

3. Remove the two screws (M2.5x7) that secure the display assembly to the palm rest and keyboard assembly.

4. Remove the antenna cables from the routing guide on the palm rest and keyboard assembly.

5. Lift the display assembly off the palm rest and keyboard assembly.