Booster - Miele KM 7678 FR Operating And Installation Instructions

Booster

When activated, the power is boosted
so that large quantities can be heated
up quickly, e.g. when boiling water for
cooking pasta. The boost in power is
active for a maximum of 15 minutes.
You can use the Booster function for a
maximum of 3 pans at the same time: 1
on the right-hand side of the cooktop, 1
in the centre and 1 on the left-hand
side.
If the Booster function is switched on
when
– no power level has been selected,
the power level will revert
automatically to power level 9 at the
end of the Booster time or if the
Booster function is switched off
before this.
– a power level has been selected, the
power level will revert automatically
to the power level selected at the end
of the Booster time or if the Booster
function is switched off before this.
While the Booster is in operation, some
of the power is taken away from the
other induction coils. If another pan is in
use on the same side of the cooktop, it
will be affected as follows:
– Auto heat-up is deactivated.
– The power level is reduced.
– Heating is switched off.
Activating TwinBooster
Level 1
 Place the pans in the required
position on the cooktop.
 Select a power level if necessary.
 Touch the B sensor control.
The  indicator light for TwinBooster
level 1 lights up.
Level 2
 Place the pans in the required
position on the cooktop.
 Select a power level if necessary.
 Touch the B sensor control twice.
The  indicator light for TwinBooster
level 2 lights up.
Deactivating TwinBooster
 Touch the B sensor control
repeatedly until the indicators go out.
Or
 Set a different power level.
Operation
33