Olsberg Ipala Compact Series Instruction Manual page 29

Fig.7
Slide the swirl combustion chamber back
2
Fig.9
1. Rotate swirl combustion chamber and
2. take it out towards the bottom
Fig.8
1
● Clean the swirl combustion chamber.
● Remove ash from the contact faces out of the stove.
● Reinsert the swirl combustion chamber and the baffle
plate in reverse order.
Attention: When inserting the baffle plate, make sure
1
A
3
1. Lift the baffle plate out of the locking pin,
2. slide it back and
3. take it out towards the bottom
to slide the bevelled edge at the front un-
der the lug in the combustion chamber (see
Detail A in Fig.8).
2
29