Before First Use - IKEA RENODLAD Manual

ENGLISH
the indicators
start to flash and the display is blank.
2. Press
• The indicators
go off.
• The indicator
• The display shows the current setting:
= Acoustic signal on.
3. Press to change the setting.
= Acoustic signal off.
4. Press the on/off button to confirm the
setting.
AutoOpen
AutoOpen improves the drying results with
less energy consumption.
While the drying phase operates,
a device opens the appliance
door. The door is then kept ajar.
Caution! Do not try to close the
appliance door within 2 minutes
after automatic opening. This can
cause damage to the appliance.

Before first use

1. Make sure that the current level of the
water softener agrees with the
, , and
, and
continues to flash.
To avoid possible hazards inside
the appliance (such as knives,
sharp objects or chemicals) for
children, pets or people with
disabilities, deactivate the
function.
AutoOpen is automatically activated with
all programmes excluding
AutoOpen is deactivated when
the programme P3 (Quick) is
combined with ExtraHygiene
option due to the high
temperature.
To improve the drying performance refer to
the DryPlus option or activate AutoOpen.
How to deactivate AutoOpen
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start flashing and the display is
blank.
2. Press .
• The indicators
are off.
• The indicator
• The display shows the current setting:
= AutoOpen activated.
3. Press to change the setting:
AutoOpen deactivated.
4. Press on/off to confirm the setting.
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
.
and until
, , ,
, ,
still flashes.
14
and
and
=