Memory Modules - HP ProBook 430 G7 Maintenance And Service Manual

Memory modules

Table 5-3 Memory module descriptions and part numbers
Description
16 GB
8 GB
4 GB
IMPORTANT:
to update the computer to the latest BIOS prior to installing new memory may result in various system
problems.
Before removing the memory module, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in Battery Safe mode
3. Remove the bottom cover
4. Remove the battery
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
module socket.
Reverse this procedure to install a memory module.
38 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Before adding new memory, update the computer to the latest BIOS from www.hp.com. Failure
(Bottom cover on page
(Battery on page
Memory modules are designed with a notch to prevent incorrect insertion into the memory
(Preparation for disassembly on page
(Battery Safe mode on page
36).
35).
Spare part number
L67710-002
L46598-002
L10598-852
34).
34).