12.
If it is necessary to remove the camera privacy cover, lift the cover straight up and off the top of the
display.
The camera privacy cover is available as spare part number L77237-001.
13.
If it is necessary to remove the hinges from the display enclosure, remove the Phillips M2.0 × 4.0 screw
(1) and the two Phillips broad head M2.5 × 2.5 screws (2) from the bottom of each hinge.
14.
Lift the hinges from the enclosure (3).
The display hinges are available as spare part number L77233-001.
Component replacement procedures
75