1.
Install the adapter bracket (1) next to the solid-state drive socket, and then install the Phillips screw
(2) to secure the bracket.
2.
Insert the drive (1) into the socket, and then install the Phillips screw (2) to secure the drive.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-5
Memory module descriptions and part numbers
Description
16 GB
16 GB, NMIC
8 GB
8 GB, NMIC
4 GB
Before removing the memory, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
Preparation for disassembly on page
Bottom cover on page
31).
Spare part number
L67710-005
N77403-005
L46598-005
N77402-005
L83673-005
31).
Memory modules
37