Changing Hostname, Gateway, And Static Routes - Extreme Networks ExtremeControl IA-A-25 Installation Manual

DNS Configuration — Search domains and DNS servers
l
NTP Configuration — Time zone and NTP servers
l
SSH Configuration — Port number and RADIUS authentication
l
SNMP Configuration — SNMP credentials for the engine
l
To access the Engine Settings window:
1. In Extreme Management Center, select Control > Access Control.
The Access Control tab opens.
2. In the left-panel tree, expand the Engines folder and then expand the All Engines
folder.
3. Right-click the desired engine and select Engine Settings.
The Engine Settings window opens.
4. Select the Network Settings tab to change your engine configurations.
For more information, see the "Engine Settings Window" topic in the
Management Center online Help.

Changing Hostname, Gateway, and Static Routes

In Extreme Management Center, use the Interface Summary section of the
Details tab for an engine to change the engine hostname, default gateway, and
static routes.
1. In Extreme Management Center, select Control > Access Control.
The Access Control tab opens.
2. In the left-panel tree, expand the Engines folder and then expand the All Engines
folder.
3. Select the engine you are configuring.
4. In the right-panel, select the Details tab.
5. Click Edit in the Interface Summary section of the tab to open the Interfaces window,
where you can change the engine Host Name and Gateway.
For more information, see the "Interface Configuration Window" topic
in the online Help
6. Click Static Routes in the Interface Summary section to open the Static Route
Configuration window, where you can add or edit the static routes used for
advanced routing configuration.
For more information, see the "Static Route Configuration Window"
topic in the Extreme Management Center online Help.
Changing Engine Settings
22 of 31