Table of Contents
Advertisement
Building in the appliance
Close the appliance door.
Measure the gap X between the ad-
justing bar and the upper edge of the
adjacent cabinet front.
Remove the nuts and washers
from the threaded bolts and store
them in a safe place – they will be re-
quired later.
The mounting frame can now be re-
moved from the appliance door.
38
Place the cabinet front on a firm sur-
face, with the external side facing
downwards (place on a blanket or
similar to avoid it becoming
scratched).
Mark the distance X -1/8" (3 mm) on
the inner side of the cabinet front.
Similarly, locate and mark the mid-
point Y on the cabinet front.
Pre-drill the holes.
Screw the mounting frame to the
cabinet front:
Use at least one screw for each re-
taining point on the mounting
frame .
Advertisement
Table of Contents
