Miele F 2461 Vi Operating And Installation Instructions page 105

Table of Contents

Advertisement

Messages in the display
Message
The warning sounds
and the message
temperature too high. Max.
appears in
temperature °F
the display.
The warning sounds
and the message
the door
appears in the
display.
The temperature display
is dark and  is shown
in the display.
Possible cause and solution
The temperature in the appliance has risen signifi-
Freezer
cantly.
This could be due to, for example:
– the appliance door being opened too often, or be-
ing left open,
– a large amount of food being frozen at once,
– an extended power failure
 If you find the alarm disruptive, you can switch it
off in advance by touching the sensor control OK.
The alarm will stop.
 Rectify the cause of the alarm.
The alarm stops and the error message disappears
from the display.
The temperature display will show the highest tem-
perature that was reached during the time the tem-
perature in the Freezer Zone rose.
 Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, cook it
before freezing it again.
 In the event of a power failure, check whether
there are any ice cubes in the ice cube tray and
dispose of these. Otherwise, the ice cubes will
freeze together and can damage the ice cube con-
tainer when they expand.
The appliance door is open.
Close
 Close the appliance door.
 If you wish to turn the alarm off early, touch the
sensor control OK in the display.
The alarm will stop.
Sabbath Mode is turned on: The interior lighting is
turned off and the appliance is cooling down.
 You can switch off Sabbath Mode at any time (see
"Selecting additional settings", section "Switching
Sabbath Mode
Frequently Asked Questions
on and off").
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

F 2471 viF 2661 viF 2671 vi

Table of Contents