Set-Up - Programming - Stramatel Multisport Eco Series Operating Instructions Manual

SET-UP - PROGRAMMING

Set-up
Press the ON/OFF key on the control console until the console displays the welcome screen.
The remaining battery charge level is indicated next. If the battery charge is insufficient for the
match, power can be supplied by plugging in the power supply supplied.
The control console will then enter into the last sport programmed. To change the sport or
access to the "general configuration" mode (See "Various configurations" – Page 7): press key
27 several times.
Select a sport or a function
Press key 27 several times (access to the sport menu).
Then, select the sport or the function needed with the key number indicated on the console
screen.
Change the sport configuration with key 0 or play with the backup configuration with key 9.
Programme the parameters of the sports
Each sport has its own configuration (parameters): length of game periods, length of the extra-
time periods, number of sets or number of periods, etc... These parameters are saved in
memory in case the Multi-Top is switched off or a new sport programmed (what makes the
use of the console easier in case of several clubs using it).
Choose a sport: the console screen displays the stored configuration for this sport during a few
seconds.
Press key 18 to view the data on the console screen longer.
Press key 18 again once this data have been read.
Change the configuration with key 0 (see below) or play with the stored configuration with key
9 (direct access to the game).
To change configuration: come back to the source configuration of the console in this sport
with key 9 or keep the last parameters with key 0.
Answer the various questions displayed on the console screen. For each question, the control
console offers the last stored configuration (the data blinks on the console screen):

enter this answer with key 23.

select another answer with keys 0 to 9.

programme lengths of time with keys 0 to 9 and and enter time with key 23.
During programming, it is always possible to come back to the previous programming with key
13.
Backlight of the console screen
The backlight of the console screen is possible to improve the readability in a poorly lit area (2
brightness levels available).
Note: the backlight of the console screen decreases the battery capacity of 15%.
Turn the Multi-Top on and programme it in the sport needed.
Choose the brightness needed by pressing key 5 several times.
ZI de Bel Air 44850 LE CELLIER FRANCE
UA452MTOPB_A - Multi-top on batteries.docx
stramatel@stramatel.com Tél. +33 (0)2 40 25 46 90
Page 6