Stramatel Multisport Eco Series Operating Instructions Manual page 29

NETBALL
Set-up
Press the ON/OFF key until the console displays the welcome screen.
Programming
Select the "Netball" mode with key 0.
The console screen displays the stored configuration during a few seconds: length of game
periods and mode of display of the game timer (count-up or count-down), length of the extra-
time periods.
Press key 18 to view the data on the console screen longer.
Change the configuration with key 0 or play with the stored configuration with key 9.
To change configuration: answer the various questions displayed on the console screen with
keys 0 to 9, and enter your answer with key 23.
During programming, it is always possible to come back to the previous programming with key
13.
Game timer
Start or stop the game timer with key 18.
End of the first 3 game periods: the rest timer starts automatically in count-up mode.
If the game timer was not stopped quick enough at the end of the period: come back to the
game timer by pressing keys 16 and 18 simultaneously.
Stop the rest timer and load a new game period or an extra-time period with key 28.
th
End of the 4 game period and end of each extra-time period: the rest timer does not start
automatically. If needed, press key 18.
Correction of the game timer:

stop the game timer with key 18, then enter in timer correction mode by pressing
keys 16 and 18 simultaneously.

shorten the game time with key 16 or increase it with key 20. Enter with key 18.
ZI de Bel Air 44850 LE CELLIER FRANCE
UA452MTOPB_A - Multi-top on batteries.docx
stramatel@stramatel.com Tél. +33 (0)2 40 25 46 90
Page 30