Setting the display brightness
Brightness
–
Set the brightness you want with the
– and + sensors and confirm your se-
lection with the OK sensor.
The display will change to the next set-
ting.
Confirm time request
Should the clock display not
be shown?
Yes
Touch the
yes
If you select
, the system will skip
yes
the
setting.
Clock display
If you select
no
, the display will switch
to the
Clock display
70
%
+
or
sensor.
no
setting.
Before using for the first time
Setting the time of day
Time
OK
Use the and sensors to enter the
time and confirm your entry with the
OK sensor.
The display will change to the next set-
ting.
Selecting programme pack-
ages
Programme
No
packages
Touch the or sensor control until
the programme package you want
appears in the display.
Touch the programme package
sensor control.
The display shows the associated pro-
grammes.
The activated programmes are marked
with a frame.
Standard
Touch the sensor controls for the pro-
grammes.
12
:
05
Standard
Pre-treat
mops
Separate rinse
OK
Confirm selection
OK
21