Miele PWM 506 Mop Star 60 Operating And Installation Instructions page 37

Pre-treat mops (ready to use)
- Mops are washed and pre-treated in one cycle.
- A pre-spin* and a pre-rinse cycle are carried out before the main wash.
- There is no water intake via the fabric conditioner compartment during the disin-
fecting process.
Mops +rtu 60 °C
Items Cotton, mixed fibre or microfibre mops
Tip Add the pre-treating agent via the fabric conditioner compartment
or the external dispensing system.
0–60 sec Extras: 2nd Pre-rinse , Microfibre 
Mops plus + rtu 40 °C to 90 °C
Items Cotton, mixed fibre or microfibre mops
Tip Add the pre-treating agent via the fabric conditioner compartment
or the external dispensing system.
0–60 sec Extras: 2nd Pre-rinse , Microfibre 
 Mops disinfection + rtu 85 °C
Items Cotton, mixed fibre or microfibre mops
Tip - Further disinfection methods can be selected.*
- Use powder detergent containing a bleaching agent.
0–60 sec Extras: 2nd Pre-rinse , Microfibre 
 Mops disinfection + rtu 70 °C
Items Cotton, mixed fibre or microfibre mops
Tip - Further disinfection methods can be selected.*
- Use specialist detergents. Observe the country-specific
0–60 sec Extras: 2nd Pre-rinse , Microfibre 
Mops rtu
Items Cotton, mixed fibre or microfibre mops
Tip - For pre-treating clean mops.
- Add the pre-treating agent via the fabric conditioner compart-
0–60 sec
* Settings can be altered in Supervisor level.
guidelines for disinfection.
ment or the external dispensing system.
Programme chart
Max. load 6.0 kg
Rinses: 2–5*
Max. load 6.0 kg
Rinses: 2–5*
Max. load 6.0 kg
Rinses: 3–6*
Max. load 6.0 kg
Rinses: 3–6*
Max. load 6.0 kg
Rinses: 1
37