Customer Override Mode - Directed Electronics Automate 640M Owner's Manual

Vehicle anti-theft system

Table of Contents

Customer Override Mode

If your transmitter is lost or does not operate your system, you can

override the system to allow you to start the vehicle. This feature will

only work for ONE start (cycle). Bring your vehicle to the dealer for ser-

vicing of the anti-theft system.

Cycle the IGNITION key from the OFF position to the START position 7-

times and then HOLD on the 8

turn. After 2-seconds the system should

disarm allowing you to drive the vehicle.

Table of Contents

Do you have a question about the Automate 640M and is the answer not in the manual?

Automate sskr