Table of Contents
Advertisement
Card reader board
Table 5-13
Card reader board description and part number
Description
Card reader board assembly (includes cable)
Before removing the card reader board, follow these steps:
1.
Prepare the computer for disassembly
2.
Place the computer in Battery Safe mode
3.
Remove the bottom cover
4.
Remove the battery
Remove the card reader board:
1.
Remove the two Phillips M2.0 × 2.0 screws (1) that secure the card reader board to the computer.
2.
Lift the board up so that you can access the connectors underneath (2).
3.
Disconnect the card reader board cable from the ZIF connector on the card reader board (1).
4.
Disconnect the RTC battery from the card reader board (2).
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page
30).
28).
29).
Component replacement procedures
Spare part number
L44579-001
28).
47
Advertisement
Table of Contents
