Omnitronic PAP Series User Manual page 14

PAP 60 I 120 I 240 I 350 I 650 I 1000 PA Amplifier
PA mono mixing amplifier with 60-1000 watts power
The amplifiers of the PAP series have been specially designed for the use in 100 V PA systems. PA
speakers with 70 V and 100 V audio transformers or 4-16 Ω speakers can be connected. The amplifiers
feature XLR and 6.3 mm jack inputs to connect audio units with line level (e.g. preamp). Furthermore, a feed-
through output is available. The amplifiers and the speakers connected are protected through extensive
protective circuits.
Overview of all features
• 1 line input (optionally XLR or 6.3 mm jack)
• 1 feed-through output (optionally XLR or 6.3 mm jack)
• 70 V, 100 V or 4-16 ohms operation
• Master control
• LED indicators for power, signal, clip and fault
• Protective circuits: over load, short circuit, turn-on delay, overheating, DC offset protection
• Load detection and power control
• Rack installation
14 • EN