Specifications - Orion C5.2 Owner's Manual

Step 4: Remove crossover and pre-drill mounting holes using a 1/8" drill bit.
WARNING: Gas tanks, fuel lines, brake lines and electrical wires have
a nasty habit of hiding where you least expect. CHECK BEFORE YOU
DRILL!
Step 5: Mount the crossover using the supplied #8 screws.
Step 6: Connect the wires. Make sure the speaker wires for the midrange
go to the woofer output and the tweeter to the tweeter output. Be
sure to observe the correct polarity. Changing the polarity may be
necessary for optimum sound quality.
Step 7: Re-install the crossover cover.

SPECIFICATIONS

Model
Nominal Impedance
Power
Continuous/Maximum
Frequency Response
Sensitivity
Mounting Depth
Mounting Diameter
Orion C5.2
4 ohms
50/100
75Hz - 20kHz
89 dB
2.375" (59mm)
4.875" (124mm)
6
Orion C6.2
4 ohms
75/100
60Hz - 20kHz
90 dB
2.75" (71mm)
5.625" (144mm)