Commissioning, Inspec-Steps - Commissioning, Inspection And Maintenance - Viessmann Vitomax LW Series Operating And Service Instructions

Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
Commissioning steps
Inspection steps
Maintenance steps
• • •
1. Commissioning the system............................................................................................... 15
• •
2. Shutting down the system................................................................................................. 16
•
3. Removing the burner (if required).................................................................................... 16
•
4. Type M148: Moving the hinge brackets to the other side of the boiler door................ 17
• •
5. Opening the boiler door(s)................................................................................................ 20
• •
6. Removing the closures of the inspection ports.............................................................. 21
•
7. Removing and cleaning the turbulators (if installed)..................................................... 21
•
8. Cleaning the heating surfaces and flue gas collector.................................................... 21
• • •
9. Checking the gaskets and packing cords on the flue gas side
• •
10. Cleaning the sight glass.................................................................................................... 21
• • •
11. Checking the thermal insulation components and gaskets........................................... 22
• • •
12. Inserting turbulators (if installed) and closing the boiler door(s)................................. 23
• • • 13. Closing and securing the inspection ports..................................................................... 24
• •
14. Mounting the burner (if required)..................................................................................... 24
•
15. Checking the water chamber for deposits....................................................................... 24
• •
16. Checking the connections and inspection ports on the water side for leaks.............. 24
• • •
17. Checking the water level and system pressure
• • •
18. Checking the safety and control equipment.................................................................... 25
• • •
19. Checking the safety valve................................................................................................. 25
• •
20. Checking the water quality................................................................................................ 25
• •
21. Checking the thermal insulation
• • •
22. Checking the installation room ventilation
• • •
23. Checking the flue pipe for tightness
• •
24. Adjusting the burner.......................................................................................................... 26
14
Page