SNMP Utility Menus (continued)
Wireless Operation
Use the Wireless Operation menu to set parameters that enable the Access
Point to communicate with other stations on the wireless LAN.
Define these Wireless parameters:
Channel ID:
There are 14 channels available with the Access Point. All devices that
communicate must use the same channel. There may be restrictions on
which channel can be used in some countries. In Canada and the U.S.,
channels 1 - 11 are authorized for use by the IC and the FCC.
ESSID:
The ESSID is used by all wireless devices within the ESS or extended
wireless LAN. This can be any alpha-numeric value of up to 32 units long.
Use this to prevent cross communication between two or more WLANs in
one area.
34