Troubleshooting (continued)
7. Resetting the DWL-7000AP to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may
choose to Reset the DWL-7000AP to the factory default settings. Remember
that D-Link AirPro products network together, out of the box, at the factory
default settings.
To hard-reset the D-Link AirPro DWL-7000AP to Factory Default Settings, please do
the following:
Locate the Reset button on the back of the DWL-7000AP
Use a paper clip to press the Reset button
Hold for about 10 seconds and then release
After the DWL-7000AP reboots (this may take a few
minutes) it will be reset to the factory Default settings
42