D-Link AirXpert DWL-7000AP Manual page 41

Troubleshooting (continued)
4. What variables may cause my wireless products to lose reception?
D-Link products let you access your network from virtually anywhere you want. How-
ever, the positioning of the products within your environment will affect the wireless
range. Please refer to Installation Considerations in the Wireless Basics section
of this manual for further information about the most advantageous placement of your
D-Link wireless products
5. Why does my wireless connection keep dropping?
Antenna Orientation- Try different antenna orientations for the DWL-7000AP.

Try to keep the antenna at least 6 inches away from the wall or other ob-
If you are using 2.4GHz cordless phones, X-10 equipment or other home se-

curity systems, ceiling fans, and lights, your wireless connection will degrade
dramatically or drop altogether. Try changing the Channel on your Access Point
and Wireless adapter to a different Channel to avoid interference.
Keep your product away (at least 3-6 feet) from electrical devices that generate

RF noise, like microwaves, Monitors, electric motors, etc.
6. Why can't I get a wireless connection?
To establish a wireless connection, while enabling Encryption on the DWL-7000AP, you
must also enable encryption on the wireless client.
For 802.11a, the Encryption settings are: 64, 128 or 152 bit. Make sure that the

encryption bit level is the same on the Access Point and the Wireless Client.
 For 802.11b, the Encryption settings are: 64, 128, or 256 bit. Make sure that the
encryption bit level is the same on the Access Point and the Wireless Client.
Make sure that the SSID on the Access Point and the Wireless Client are exactly the
same. If they are not, wireless connection will not be established. Please note that
there are two separate SSIDs for 802.11a and 802.11b. The default SSID for both
802.11a and 802.11b is default.
.
41