D-Link AirXpert DWL-7000AP Manual page 18

Tri-mode dualband 2.4/5ghz wireless access point

Hide thumbs Also See for AirXpert DWL-7000AP:

Table of Contents

Using the Conﬁguration Menu (continued)

Advanced > Grouping

Load Balance:

Select Enabled or Disabled.

When you Enable

wireless network trafﬁc and wireless clients among the DWL-7000APs with the

same group name. After selecting this option, you will be prompted to enter a

Group Name. All the APs that share Load Balancing must have the same Group

Name and the same SSID. Assign each Access Point a different non-overlapping

channel (e.g., 1, 6, 11).

User Limit:

Set the User Limit in this ﬁeld (0-64)

Link Integrity:

Select Enabled or Disabled

When Link Integrity is Enabled, whenever the Ethernet connection between

the LAN and the AP is disconnected - then the Wireless segment associated

with the AP will also be disconnected from the AP.

Ethernet Link Status:

that there is an Ethernet LAN connection to the AP.

Link Integrity

you allow several DWL-7000APs to balance

Load Balance

This ﬁeld displays the Ethernet Link Status. Link Up indicates

Table of Contents