The Sewing Operation - Mitsubishi PLK-E1010 Technical Manual

Caution
Depending on the shape of the work
holder, the collision may be happened
with the work holder and the presser foot
while the work holder is on the way back
to the home position. For avoidance of
this accident, before starting the sewing
operation, program the work holder
returning home with the operation panel
of the control box to trace the sewing
pattern.
For this setting, refer to the [Wiper
Setting] in the [PROGRAM MODE] on
the operation panel.

6-2. The sewing operation

Caution
It is very dangerous to operate the sewing machine without the safety guards (Eye guard,
Belt cover, Link cover, Finger guard etc.).
Please make sure to always operate the sewing machine with the safety guards.
Please do not put unnecessary articles except for the sewing operation on the tabletop.
Please keep the hands and the face away from the needle.
(1) Turn the power switch (NO.1) ON.
NOTE The collision may be happened with the work holder (No.2) and the presser foot
(No.3) depending on the work holder shape when the work holder is moved to
original position.
In this case, if home positioning method [HPF] is set to ON, home positioning
switch
(2) Program or select the required sewing pattern by selecting following icon.
Programming --------
Selecting pattern ----
The sewing pattern programming or selecting can be performed with the operation panel.
For the details, please refer to the instructions on the technical manual
Panel].
(3) Set the sewing speed by selecting
(4) Insert the sewing material under the work holder (NO.3) then, step on the black color foot
switch (NO.4). The work holder comes down to press the sewing material.
[NOTE] If the sewing material has to be reset, step the black color foot switch (NO.4)
again then; the work holder goes up to release the sewing material.
From the library of Superior Sewing Machine & Supply LLC • www.supsew.com
becomes inactivate during the work holder goes up.
>>
>>
or
16
icon.
[Operation