Using The Configuration Utility - D-Link DWL-520 Quick Installation Manual

Appendix

Using the Configuration Utility

A. Status: Displays the
MAC Address of the
Access Point that is
associated with the
DWL-520.
A
B
C
D
E
F
D. Channel: Displays the
channel information. By
default, the channel is
set to 6 and selection is
automatically determined
by the DWL-520.
:
B. SSID The Service Set
Identifier is the name
assigned to the wireless
network. The factory
SSID setting is set to
default.
E. Link Quality / Signal Strength:
Displays the Link Quality for the DWL-
520 wireless connection to the access
point. The Signal Strength represents
the wireless signal between the access
point and the DWL-520. The percentage
coincides with the graphical bar.
C. TxRate:
The default setting is
Auto; meaning, TxRate settings
are automatically determined by
the DWL-520 depending on the
distance from the access point.
F. Data Rate:
Graphically displays
the statistics of data
transmitted and
received.