D-Link DWL-520 Quick Installation Manual page 11

For Windows Me and 98se users:
Click Internet Protocol (TCP/IP)
Go to Start > Settings
click on the Local Area Connection
with the DWL-520 > select
Click Internet Protocol (TCP/IP)
Click Properties
Dynamic IP address setup
Used when a DHCP server
the local network. (i.e. Router)
Select Obtain an IP address
automatically
Router or Access Point has
DHCP server enabled)
Select Detect connection
to network media
Click OK
Static IP address setup
Used when a DHCP server
on the local network.
Select Use the following IP
address
IP address: 192.168.0.52
Subnet mask:
Input a static IP address in the same
range as the Wireless Router or
Access Point.
Click OK
> Control Panel > Double-
associated
Properties
is available on
(if the Wireless
is not available
255.255.255.0