Ec Declaration Of Conformity - Husqvarna 520iHD60 Operator's Manual

EC Declaration of conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declare that the hedge trimmers
Husqvarna 520iHD60, 520iHD70 with serial numbers
dating from 2018 onwards (the year is clearly stated on
the rating plate, followed by the serial number), comply
with the requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC.
• of June 8, 2011 on the "restriction of use of certain
hazardous substances" 2011/65/EU.
The following standards have been applied:
EN 60745-1:2009, EN 60745-2-15:2009, EN
55014-1:2017, EN 55014-2:2015 EN 62133:2013, EN
60335-2-29:2004, EN 50581:2012
Notified body: 0404, SMP Svensk Maskinprovning AB,
Box 7035, SE-750 07 Uppsala, Sweden, has carried out
EC type examination in accordance with the machinery
directive's (2006/42/EC) article 12, point 3b.
SMP Svensk Maskinprovning AB, has also verified
agreement with appendix V of the council's directive
2000/14/EG. The report has the number: 01/094/024.
For information relating to noise emissions, refer to
Technical data on page 15 .
Huskvarna 2018-11-12
Pär Martinsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation.)
773 - 002 -
EC Declaration of Conformity
17